-->

Featured Post Slider

  • Compilation of some extreme bodyworks

    Often, you see cars modified with some pretty extreme bodywork; we take the best ones found throughout the net and compiled them together! Check it out Read more

  • 2012 Proton Saga FLX bolt on turbo

    Here is my own 2012 Proton Saga FLX bolt on turbo. Currently running without management, still able to boost up to 0.4 bar (albeit with bad fuel consumption). Saving up for a Haltech Sprint 500 standalone! To complement the power, a new semi-racing clutch will be dropped in. Next is to upgrade the brake system to a double servo pump, and better brake pads. The car is currently running on a lowered spring setup (Sapura sports spring) which is sufficient for daily usage. Read more

  • Audi TT with R8 Look-alike Bodykit

    To those who have an Audi TT and wants something resembling an Audi R8 supercar, a few tuning and bodykit companies has modeled a kit that consists of various configurations ranging from exterior down to the light and exhaust setup. Hit the jump for more detail! Read more

  • 4G92 Proton Wira 1.6 Bolt on Turbo

    4G92 Proton Wira 1.6 Bolt on Turbo, on a budget!. The Proton Wira is actually a Mitsubishi Lancer using the same 4G92 1.6 SOHC engine.Total cost is less than RM5,000 which is equivalent to 1500 USD dollar, which has escalated somewhat (and now pushes around 200whp) Read more

Pages

Wednesday, March 28, 2012

Proton Wira with DIY Hellaflush rim


This brave Malaysian guy had his rims custom made, which appeared to  be based off your standard steel rims. He also drives his car around on a daily basis. Not so certain of its durability, but it sure looks great and gives the car a completely different look with its stance! Respect! Proton Wira DIY Hella flush project!











Owner of these Hellaflush Wira pictures snewpy @ http://www.dzeusvip.com

Read more about Wira Hellaflush: http://www.dzeusvip.com/Forums/viewtopic//printertopic=1/t=7335/postdays=0/postorder=asc/start=0/finish_rel=-10000.html

Keywords: Wira VIP, Wira Hellaflush, Wira Deepdish, hellaflush Malaysia

12 comments:

  1. where can get rims like this?
    any suggestions for me to get?
    I am very interested!

    ReplyDelete
    Replies
    1. https://forum.lowyat.net/index.php?act=ST&f=113&t=3161371&st=0#entry66948955

      Delete
  2. bro u from kk is it? we got the same stule of wira.my rims are also kinda the same wit urs.

    ReplyDelete
    Replies
    1. Hello there! I got the pictures from the internet, just sharing it out :D

      Delete
    2. Hi 2nd anonymous..ur wira r on steelies too? id love to see it :) well, tis car is history alrdy. This blog is memories of it. Thnks & credits to this blog author for blogging abt it :) missed 2060 much!!

      Delete
    3. Hi Kevin Jay, credit should be yours for doing this! I wanted to do steelies but saving up for a proper suspension first :D Very hard to find steelies like what you have here in KL, mostly they are for 4x4 or normal sport rims with offset type. Cheers! Love your ride, great job.

      Delete
  3. nut at rear bumper dint kena tyre ?

    ReplyDelete
  4. where i can get this rims?.... and how much?

    ReplyDelete
    Replies
    1. https://forum.lowyat.net/index.php?act=ST&f=113&t=3161371&st=0#entry66948955

      Delete
  5. Your mode of describing everything in this paragraph is
    actually fastidious, every one can easily know it, Thanks a lot.


    Stop by my site :: ford ranger forum

    ReplyDelete

Thank you for your comment!