-->

Featured Post Slider

  • 2013 Toyota Vios Unveiled

    ! From the looks of it, the car does seem to be designed and catered for a younger crowd. The front end is restyled and looks aggressive, which is kind of similar to a Proton Preve. They are also in the same price segment. For new car buyers, would you buy the Proton Preve with its Punch powertrain CVT gearbox and Campro CFE turbocharged engine or the 2013 Toyota Vios with perhaps a less than stellar performance 1.5-Litre engine? Tough choice. Read more

  • Compilation of some extreme bodyworks

    Often, you see cars modified with some pretty extreme bodywork; we take the best ones found throughout the net and compiled them together! Check it out Read more

  • 2012 Proton Saga FLX bolt on turbo

    Here is my own 2012 Proton Saga FLX bolt on turbo. Currently running without management, still able to boost up to 0.4 bar (albeit with bad fuel consumption). Saving up for a Haltech Sprint 500 standalone! To complement the power, a new semi-racing clutch will be dropped in. Next is to upgrade the brake system to a double servo pump, and better brake pads. The car is currently running on a lowered spring setup (Sapura sports spring) which is sufficient for daily usage. Read more

  • Audi TT with R8 Look-alike Bodykit

    To those who have an Audi TT and wants something resembling an Audi R8 supercar, a few tuning and bodykit companies has modeled a kit that consists of various configurations ranging from exterior down to the light and exhaust setup. Hit the jump for more detail! Read more

  • 4G92 Proton Wira 1.6 Bolt on Turbo

    4G92 Proton Wira 1.6 Bolt on Turbo, on a budget!. The Proton Wira is actually a Mitsubishi Lancer using the same 4G92 1.6 SOHC engine.Total cost is less than RM5,000 which is equivalent to 1500 USD dollar, which has escalated somewhat (and now pushes around 200whp) Read more

Sunday, May 13, 2012

Proton Saga FL R3 Custom Bodykit

Check out this sweet R3 custom made body kit! Front bumper has its design from a Satria Neo R3 lower bumper. Very good workmanship and well integrated, no signs of Ah Beng (rice) detected. I would have believed it if you told me this came stock from the factory!



Check out the R3 rims! This rims actually remind me of Nissan GTR's rim! The design is almost similar. The offset and stance suits the Proton Saga FL / FLX very well.


One little quirk; the bumper isn't aligned properly at the number plate area, you can see there is a slight curve and gap on the right. Could be an angle problem though. Overall this is a very sporty bumper! Hope they have PU versions for sale soon :).
More pictures and credits to: Kamarul’s Saga SE R3.
Source: http://paultan.org/2011/02/13/proton-saga-se-r3-concept-by-reader-kamarul-xy/
Posted by at
Reactions: 

11 comments:

  1. mane nak dpt rim r3?

    ReplyDelete
    Replies

    1. You can buy in shah alam proton centre

      Delete

  3. wow..awesome saga

    ReplyDelete

  4. Looks like Saga BLM, not FL x.. Can the bodykit for BLM put to FLX?

    ReplyDelete

  5. Not too sure if can fit FLX. Rim size is 16".

    ReplyDelete

  6. These are nice pictures. Thank you for sharing this. Hope to get more updates.

    ReplyDelete

  7. may i know where got sell n buy this sporty bumper so fantastic

    ReplyDelete

  8. may i know where got sell n buy this sporty bumper so fantastic

    ReplyDelete

  9. add this guy on facebook---saga blm bodykit..he got plenty of bodykits design..blm fl or flx..

    ReplyDelete

  10. add this guy on facebook---saga blm bodykit..he got plenty of bodykits design..blm fl or flx..

    ReplyDelete

Thank you for your comment!

Subscribe to: Post Comments (Atom)